Interpretation of four major key technologies of LED fluorescent lamps
Fluorescent tubes are widely used in daily life, supermarkets, schools, office cities, subways, etc., but in public places that can be seen, you can see the use of fluorescent lamps! How to make the LED life and brightness reach the standard of satisfactory use is a very meaningful topic! LED fluorescent lamps should maintain long life and high brightness. The problems to be solved are: power supply, LED light source, heat dissipation and safety. 1. power supply 2. LED light source Although the traditional patch products can be connected to the positive and negative electrodes through the gold wire of the chip, and the thermal energy generated by the chip is connected to the silver foot through the gold wire, the conduction of heat and electricity is conducted by money, and the heat accumulation time is long. Will directly affect the life of LED fluorescent tubes. 3. Heat dissipation The introduction of infrared radiation into the fluorescent tube is an important means to improve the service life of the lamp. In the heat dissipation consideration, we separate the heat dissipation of the LED light source bead and the heat dissipation of the power supply, and do not interfere with each other, thereby ensuring the rationality of heat dissipation. There are three ways of heat conduction, convection, conduction and radiation. In a closed environment, convection and conduction are less likely to be achieved, and the emission of heat by radiation is the focus of fluorescent tube considerations. 4. Safety The development of LED fluorescent lamps has been going on for quite a long time. From the perspective of energy saving, its future application is quite broad. In addition to energy saving, its safe and long-life use is something we should pay more attention to! Safety! In the design of LED fluorescent lamps, it is the first element. The fluorescent lamps using PC flame retardant materials can improve the life after solving the safety problems. The solutions proposed by the above projects hope to provide more LED fluorescent tube manufacturers with more solutions. Way of thinking! 12 volt lithium marine battery,optima marine battery,lithium ion marine battery,autozone marine battery,lithium deep cycle marine battery,12v battery deep cycle marine EMoreShare International Trade (Suzhou) Co., Ltd , https://www.emoreshare.com
The primary requirement of the power supply is high efficiency and high efficiency. If the heat is low, the stability will be high. Generally, there are two schemes of isolation and non-isolation in the power supply part. The isolation volume is large and the efficiency is low. In use, there are many problems in installation. It is not as good as the market prospect of non-isolated products. Here we mainly discuss non-isolation. Drive solution.
The LED light source adopting the patent structure of Taiwan Mingmings has its chip placed on the pin, and the thermal energy passes through the silver foot directly to the tropical part generated by the chip node, which is the same as the traditional in-line product and the traditional patch product in terms of heat dissipation. Different quality, the node temperature of the chip will not accumulate, thus ensuring the good use of the light source bead, ensuring the long life of the light source bead, low light decay.
Safety, here mainly refers to PC flame-retardant plastic tube, because infrared heat can penetrate PC tube, we design to consider the safety of LED light when using it, use physical insulation of plastic, even if it is used The isolated power supply also guarantees the safety of use.