Logic level measurer circuit principle
This circuit can be used to detect logic levels whose level change frequency is not too high, and can be detected for both TTL level and CMOS level.
Fume infinity Disposable Vape is the newest from Fume, and it offers more than 3500 puffs. If you are a frequent vaper, you'll fall in love with this vape kit.
Fume infinity vape 3500 puff comes with a powerful battery with 12ml oil,the Fume Infinity, an amazing powerful disposable vape device that will last you more than 3500 puff.The Fume Infinity features an new design different from the fume ULTRA and fume EXTRA model. It comes to be more compact than the previous models yet significantly more powerful- lasting consumers days at one time.The Fume Infinity also packs 12ml of DELICIOUS flavors, featuring some of the best selling tastes from the Fume EXTRA and ULTRA models.
The Fume Infinity 3500 Puff Disposable Vape feature a small box but big power! The box container design of this hand held vape pen provides a comfortable experience. Once you hold it, you'll love it! Consisting of a mesh coil, the Fume infinity 3500 puff disposable delivers the purest of flavors. Each Fume 3500 puff vaporizer disposable takes the stress out of running out of power. The contrasting colors of this handheld vape pen provide enjoyment, and personality on every puff!
Fume 3500 Puffs,Fume 3500 Puff Disposable Vape,Fume 3500 Puffs Electronic Cigarette,3500 Puffs E-Cigarette Shenzhen Essenvape Technology Co., Ltd. , https://www.essenvape.com
As shown in the figure, the 7555 is used as a hysteresis level comparator. When the probe P is in contact with the high level, the 7555 outputs a low level to make LED1 bright and LED2 dark. When P touches a low level, the 7555 outputs a high level so that LED1 does not illuminate and LED2 illuminates.
When used to measure the TTL level, the power supply can be powered by a 4.5V battery. The voltage of the 5755 pin of the 7555 is 2.4V. At this time, the 2.4V is high level and the 1.2V level is low level.
When measuring the CMOS level, the power supply voltage needs to be close to the power supply voltage of the logic circuit under test, and the W center head is disconnected. At this time, two-thirds of the power supply voltage is high, and one-third lower than the power supply voltage is low.
In the measurement, the eye will not be able to observe the level of the logic level. This can be estimated according to the different luminous intensity of LED1 and LED2. The pulse duty ratio is greater than 50% or less than 50%. The duty ratio is greater than 50%. Then LED1 is brighter, otherwise LED2 is brighter.
Device Details:
Size: 12ml
Nic Strength:2%/5%
Battery Capacity: 1500mAh
Puff Count: 3500+ Puffs
Flavors: 12 Available Flavors
Flavors: