China Lighting Network hired 24 industry experts to set up an expert advisory committee

June 08, 2024

2011 China Lighting Network Special Expert Advisory Committee Spring Festival Meeting

In order to enhance the overall strength of China's lighting electrical industry, strictly control its professional standards, and then strengthen the authoritative professionalism of China's lighting network, China Lighting Network held the 2011 China Lighting Network Special Expert Advisory Committee Spring in Zhujiang Hotel, Guangzhou on April 9th. Qi Hui, Chairman of the China Lighting Society Wang Jinxi, Chairman of Hedong Electronics Liang Guoqin, Vice President Zhao Jianping of the Institute of Building Environment and Energy Conservation of the China Academy of Building Research, Wang Kechang of the Guangzhou Construction Committee, representatives of industry experts, representatives of lighting companies, media representatives, etc. Nearly 100 people were invited to attend the Spring Festival.
Secretary General Xu Huai of the China Lighting Society presided over the meeting
The representatives of the experts attending this Spring Festival are Mr. Yu Shukui, Vice Chairman of the China Lighting Society, Deputy Secretary-General of China Lighting Association Dou Linping, Deputy Secretary-General of China Lighting Society Liu Shiping, and China Construction International Design Consultancy Co., Ltd. (CCDI Group) Li Binghua Electric Chief Engineer, Chairman of the Shanghai Lighting Society, Zhang Haijun, Chairman of Hangzhou Zheda Tricolor Instrument Co., Ltd., Tong Tongsheng, Deputy Secretary General of China Lighting Society Gao Fei, Professor Wang Lixiong, Institute of Architecture and Science, School of Architecture, Tianjin University, Chongqing University Architecture Professor Yan Yonghong from the School of Urban Planning.

The list of representatives who were invited to attend was Liu Xingming, deputy general manager of Foshan Lighting, Liu Suining, general manager of Thorn Lighting (Guangzhou) Co., Ltd., Guan Xudong, deputy general manager of Audi General Lighting (Guangzhou) Co., Ltd., and Liu Xiaoming, Zhejiang Hehui Lighting Technology Co., Ltd. Liu Li, deputy general manager of Guangzhou Yajiang Optoelectronic Equipment Co., Ltd., Wu Lin, Public Relations & Government Affairs Manager of Osram (China) Lighting Co., Ltd., Qin Shangguang, Liu Jinlan, Midea Lighting Li Yingwei, Deputy General Manager of Liangli Lighting, Liu Dan, Guangdong Ding Yungao, deputy general manager of Huari Lighting, Luo Chunyan, sales director of Zhongshan Huayi Lighting, Dongguan Rongwen Li Zhixiong and so on.

Chairman of the China Lighting Society, President Wang Jinxi, delivered a speech

Chairman of Hedong Electronics Liang Guoqin delivered a speech
At the meeting, Secretary General Xu Huai of the China Lighting Society presided over the meeting. Chairman Wang Jintao made a brief report on the development of China's lighting network and the current audience and regional distribution, and said that the purpose of setting up a special expert advisory committee is to gather lighting. Experts in different professional fields in the industry, with their professional knowledge guidance, guide the road direction for the development of lighting enterprises in China. Later, Chairman Liang Guoqin shared with the participants that the original intention of establishing a lighting network was to give back to the society. He hoped that the user enterprise would act as the owner of the lighting network and briefly reported to us that HDL will continue to be in the lighting industry and smart lights in the future. Continue to contribute to the development of the field of control.
General Manager of China Lighting Network Chen Yumei
Following the general report of China Lighting Network, General Manager Chen Yumei on the development of China's lighting network and the establishment of a special expert advisory committee, 2011 is the 14th year of the establishment of China Lighting Network, and will continue to be eager to communicate with peers. The lighting people cooperate and promote the development of China's lighting industry. The China Lighting Network Special Expert Advisory Committee consists of 24 industry experts. They all have more than eight years of experience in the field of lighting, and have rich theoretical knowledge and practical experience. And has a senior title. Since then, the lighting network will continue to provide professional lighting news information with a new look and aggressive attitude. Subsequently, Chairman of the China Lighting Society, Wang Jinxi, and Chairman of Hedong Electronics, Liang Guoqin, issued a letter of appointment for the invited experts.
China Lighting Network special expert consultant appointment letter

Mr. Tong Tongsheng, Chairman of Hangzhou Zheda Tricolor Instrument Co., Ltd. participated in the discussion
The last agenda of the Spring Festival meeting made an interactive discussion on how to better promote the construction and development of China's lighting network. The experts and representatives of the industry expressed their opinions. The chief engineer of CCI Group Li Binghua Electric Put forward four or four opinions, meaning less business, more academics; less profit, more solid; less static, more dynamic; less extreme, more fair, etc.; and the general director of AD lighting stressed that China's lighting network should highlight " The official website features specialties and policies in a network; Thorn Lighting Liu has long cooperated with multiple services of the lighting network. After experiencing the services of China's lighting network, I feel that there is room for improvement in the collection of standard information at home and abroad.

It is reported that China Lighting Network is preparing to build a gold finger lighting club that communicates with the owners, lighting designers and enterprise manufacturers. It aims to strengthen communication between peers and lighting people, and to broaden the horizon of lighting people and improve the level of lighting technology. purpose. The establishment of the China Lighting Network special expert advisory committee has a long way to go, not only shoulders the mission of leading the development of China's lighting industry, but also plays an indispensable guiding role for the future construction and development of China's lighting network. effect.

Participants interact with each other during breaks

2.4G Router Module
What is 2.4g wireless module?
2.4g line module operating frequency in the range of 24400-2484mhz, can communicate through the scanning protocol, air rate up to 1Mbps, output power up to +4dBm, the module has the advantages of low power consumption, cost-effective. Movingcomm's current 2.4g antenna modules are: IOT04, IOT05, IOT09, IOT18, IOT60, etc. Users can choose a variety of modules with a transmission distance of 50-500 meters according to cost considerations.

Second, the role of 2.4g wireless module
Function 1, for the formation of a star topology wireless communication network, and must be a multi-point star topology, some extraordinary places need wireless communication. On the one hand, the transmitting and receiving module is cheap, and the cost of forming the star topology is relatively low. On the other hand, the transmitting and receiving module can adopt the modular design, which is small in size, easy to use and easy to integrate. For the wireless network with low communication speed and close distance, the transmitting and receiving module is very practical.

Function 2, for wireless multi-channel (parallel) control. Such as complex remote-controlled robots, some places require multi-channel (parallel) control. One method is to use the receiving module to directly connect to the decoder, and then connect to the relays and other electronic components to drive the subsequent controlled object; the other method is to use the receiving module to connect to the single chip microcomputer, and after the data is disposed of, the single chip microcomputer is connected to the relays and other electronic components to drive the subsequent controlled object. Usually a pair of transmitting and receiving modules can achieve up to six parallel wireless control, if the required number of channels is greater than six, you can use multiple pairs of transmitting and receiving modules, and work at the same time to meet the actual needs.

Function 3, used for general serial port, RS232 antenna data transmission, there are usually many control instruments and equipment using serial port, and communication with these devices must meet the requirements of serial port. In some extraordinary places, when the industrial control site must use the antenna transmission mode, it is natural to choose the transmitting and receiving modules mentioned in this article, but it must be explained here that to use this communication mode, the corresponding software must be prepared at the transmitting end and the receiving end respectively to achieve the conversion of file formats, in order to achieve the purpose of wireless communication, if the communication system is full-duplex. It can be achieved by using two pairs of transmitting and receiving modules, working simultaneously.

Third, 2.4g wireless module application field
2.4G wireless module is widely used in wireless health sports products, wireless mouse and keyboard, product information push, wireless remote sensing, wireless ranging system, alarm security system, smart home, toy control, tire pressure monitoring and other fields. With the 2.4G wireless module, all the whole house wireless smart home can be linked together, you can control all the smart home devices through the link of the network, and then you can control the switch of all the whole house wireless home, adjust the brightness of the lamp, adjust the rise and fall of the curtain, etc., through the continuous innovation of technology, The whole house wireless smart home can be controlled by a small white robot voice, can be controlled by a smart scene panel, can be controlled by sensors and so on.

Four, 2.4g wireless module how to choose antenna
In general, the 2.4g wireless module requires an impedance of 50 ohms, a red wire used with 2.4g, a 2.4g folded rod antenna, a 2.4g gold-plated straight head rod antenna, a 2.4g gold-plated elbow rod antenna, and a 2.4g small suction cup antenna. These antennas are special antennas designed for 2.4g wireless communication system, antenna standing wave ratio performance is good, small size, clever structure, easy installation, stable performance, with good anti-vibration and aging ability.
2.4G Router Module,M2 Wifi Module,2.4 Ghz Wifi Module,Mini Wifi Module
Shenzhen MovingComm Technology Co., Ltd. , https://www.szmovingcomm.com