Model NO.: TLP
Surface Treatment: Surface Treatment
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Bending Radius: 50mm-750mm
Max.Width(mm): 200mm-650mm
Trademark: tianbao
Transport Package: Ply Wooden Case
Specification: CCC, ISO9001
Origin: Chongqing China
HS Code: 39269010
Model NO.: TLP
Surface Treatment: Surface Treatment
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Bending Radius: 50mm-750mm
Max.Width(mm): 200mm-650mm
Trademark: tianbao
Transport Package: Ply Wooden Case
Specification: CCC, ISO9001
Origin: Chongqing China
HS Code: 39269010
Basic parametersÂ
1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:
Tensile strength |
180N/mm2 |
Volume resistance |
1010-1015 |
| Impact strength |
50Kj/m2 |
Water Absorption |
4% |
| Tenprature range |
-40.C-130.C |
Friction factor |
0.3 |
| Surface resistaned |
1010-1012 |
Falme resistance |
HB(UL49)
 |
Pictures:
Â
Advantages
1. It has very nicelooking appearance and has very rationalconstruction and flexible and high strength. It is reliable and easy to operate, install, dismantle or assemble. It is worthwhile mentioning that the antiwearing performance has been improvedgreatlydue to wear resistent material and alloy pin-shaft are used.
Â
2. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time without any deforming or hanging down.
Â
3. The product is nicelooking, which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
Â
Feature
Â
The feature of the Engineering Plastic Roller Chain Cable Drag Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).
Â
Application
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.
InstallationÂ
1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.
Order
Â
Kindly please advise the below:
Â
1. Length:Â
2. Cable or pipe Max. Dia.:
3. Supporting board type:
Â
4. Bending Radius(or the curved height ):
Contact
Amy
Skpe:slide wire
Basic parametersÂ
1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:
Tensile strength |
180N/mm2 |
Volume resistance |
1010-1015 |
| Impact strength |
50Kj/m2 |
Water Absorption |
4% |
| Tenprature range |
-40.C-130.C |
Friction factor |
0.3 |
| Surface resistaned |
1010-1012 |
Falme resistance |
HB(UL49)
 |
Pictures:
Â
Advantages
1. It has very nicelooking appearance and has very rationalconstruction and flexible and high strength. It is reliable and easy to operate, install, dismantle or assemble. It is worthwhile mentioning that the antiwearing performance has been improvedgreatlydue to wear resistent material and alloy pin-shaft are used.
Â
2. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time without any deforming or hanging down.
Â
3. The product is nicelooking, which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
Â
Feature
Â
The feature of the Engineering Plastic Roller Chain Cable Drag Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).
Â
Application
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.
InstallationÂ
1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.
Order
Â
Kindly please advise the below:
Â
1. Length:Â
2. Cable or pipe Max. Dia.:
3. Supporting board type:
Â
4. Bending Radius(or the curved height ):
Contact
Amy
Skpe:slide wire
Solder Cup Power D-Sub Connector
ANTENK are a leader in the design, worldwide manufacture, and marketing of Solder Cup Power D-Sub miniature, D-Sub connectors designed for applications that require a rugged / robust I/O connector system.The Antenk POWER-D & Combo-D mixed contact d-sub connectors solder type are designed for rugged / robust applications where both power & signal are required from a single connection. Featuring [Solid-Pin" machined contacts, these connectors offer high reliability performance. These products are used in nearly all application markets, from control and measuring to telecommunications and computer applications. Owing to the combination of various contact types there are numerous possibilities of saving installation space and costs in the interface area. Antenk Power D solder cup connectors have a metal shell in both the plug and socket versions as well as stamped contacts with tin/lead in the solder cup area. They offers ease of termination and reliability.
ANTENK POWER SOLDER CUP D-SUB CONNECTOR
Select from a full range of premium cable mount Solder Cup D-Sub Connectors in standard & high density pin positions with either stamped or machined contacts.
ANTENK SOLDER CUP D-SUB MIXED CONTACT | MACHINED FEATURES
D-Sub Mixed Contact Connectors in 12 industry standard contact configurations: 3W3 | 3W3K | 5W1 | 5W5 | 7W2 | 8W8 | 9W4 | 11W1 | 13W3 | 13W6 | 17W2 | 21W1 | 21WA4
Available with 20 or 40 amp power contacts, 5 amp signal.
Allows signal, high current & high voltage in one connector.
Contacts are pre-loaded into the insulator.
ANTENK SOLDER CUP D-SUB MIXED CONTACT MATERIALS
Shell: Steel, nickel plated
Insulator: Glass-Filled Thermoplastic, U.L. 94V-O, Black
D-Sub Mixed Signal Contacts: Machined Copper Alloy, Full Gold Flash
D-Sub Mixed Power Contacts: Machined Copper Alloy, Full Gold Flash
Combo Power D-sub Connector,Power D solder cup connectors, High Current D Sub Connector solder type, POWER-D Mixed Contact Connectors,Combo D-sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com