Electromagnetic compatibility (EMC) components for LCL filters in regenerative inverter systems
TDK Corporation has introduced the EPCOS high-performance LCL filter (B84143*405) series for regenerative inverter systems. The series consists of a power choke, a capacitor bank with a damper resistor, and a rugged choke. The filter circuit greatly reduces the clock frequency and is fully compliant with IEC / TS 62578. The EMI emission range is 9 Specification for devices from kHz to 150 kHz. In addition, in regenerative inverter systems, the EPCOS LCL filter can significantly reduce line-side current harmonics (less than 5%). Finally, in high DC link voltage applications, the LCL filter can also turn a regenerative drive into a boost converter via an integrated choke. The latest series of LCL filters from EPCOS are rated at 520 V and rated at 16 A, 66 A, 200 A and 400 A. Two smaller models with rated currents of 16 A and 66 A are mounted on the mounting plate for ease of use; larger models with rated currents of 200 A and 400 A are composed of two parts, including a single energy storage. Choke and a mounting plate that combines a power choke and capacitor bank. The LCL filter is mainly suitable for feedback modules with a clock frequency of 7 kHz to 16 kHz and motor-side inverter modules with a clock frequency of 4 kHz to 16 kHz. It supports motor leads or 6-axis leads with a maximum length of 150 m. The motor frequency is 100 Hz. In addition, the built-in damping resistor prevents natural oscillations. The latest series of LCL filters from EPCOS are designed with an open design and IP00 protection with convection cooling (according to IEC 60529 2001); we can also provide you with an additional protective cover for IP20 protection, please use the order code B84143Q*R405 Make an order. Compared to a separate power supply choke, the EPCOS LCL filter significantly reduces harmonics and voltage and current distortion of the power line. In addition, the LCL filter has a lower voltage drop and is more compact and lighter than a power choke of the same specification. The LCL filter can be modified as needed, depending on the customer's needs. main application · Regenerative inverter system Main features and advantages · Rated current up to 400 A, rated voltage 520 V · Significantly reduce harmonics, less than 5% · Lower voltage drop and voltage and current distortion · Compact design and lighter weight 7/8" series Connection Cable provides a wide range of metric for power supply .The ingress protection is available and rated to IP 67, these connectors are ideally suited for industrial control networks where small Sensors are required. Connectors are either factory TPU over-molded or panel receptacles supplied with sold-cup for wire connecting or with PCB panel solder contacts. Field attachable / mountable connector is also available for your choice. 7/8" Bulkhead Connector,7/8" connector Cable,7/8" Power Connector cable,Power Connector male to female Kunshan SVL Electric Co.,Ltd , https://www.svlelectric.com