Jieke R1 Ali cloud brush music firmware tutorial [with firmware package]
Networked Coordinated Signal Controller Traffic Signal Controller,Adaptive Signal Controller,Cooperative Traffic Signal Controller,Networked Coordinated Signal Controller Jiangsu Bosiwei Optoelectronics Group Co.,ltd , https://www.bswledled.com
Jieke R1 brush Android firmware package specific steps:
1. Download Jieke Andrews firmware package, and then unzip the firmware upgrade package on the computer. Copy the extracted file zip file, recovery.img, uboot.bin, factory_update_param.aml, and ethmac.flash to the root directory of the TF card. , Unplug the Jieke R1 power supply;
(Android firmware package download address, http://pan.baidu.com/s/1emy7V)
2. Insert the TF card, press and hold the power button of the Jacob R1, plug in the power, wait for about 20 seconds, after the system prompts to start the automatic upgrade, release the finger pressing the power button;
3. During the upgrade process, please do not pull out the TF card or turn off the power. After the system is upgraded, it will be restored to the factory state. The previously installed APK will not be retained.
Jieke R1 brush music as the firmware package operation process:
1. Download REC Toolkit and Brush Firmware Package (Copy Firmware Package to SD Card);
Brush firmware package download address, http://pan.baidu.com/s/1o6maLn0
Brush Kit download address, http://pan.baidu.com/s/1hq0zAug
2, run batch processing, and then enter the box IP address, etc. prompts whether to enter REC, then enter Y;
3, into the REC, select INSTALL FROM SDCARD, select SDCARD Brush Brush can be brushed into;
The remote control cannot operate after the Jacob R1 enters REC Problem Solution
1. Download the following TV box assistant
Download address, http://pan.baidu.com/share/link?shareid=1596113927&uk=3942648777
2, download Jieke R1 remote control file
Download address, http://pan.baidu.com/s/1dDeR8v3
3. Click "Open Assistant" - "Connect Box" - enter box IP connection
Click on "Custom Remote" prompt to select "Yes"
4. Select the remote control file you just downloaded. Click the “Replace†box to restart the remote control. The menu button, volume, and return key are all OK.